Fire doors in Rumia

WIKĘD’s fire doors in Rumia — ranges and profiles

Our range includes fire doors in the following classes: EI30 and EI60, manufactured using the FIREPROTECTOR ALU system with a 78 mm profile. For stairwells and vestibules, we select variants with Sa and S200 smoke-tightness ratings — the latter is suitable where the design requires tightness even at high smoke temperatures. The aluminium construction allows for solid door leaves or those with fire-resistant glazing, in single- and double-leaf versions, fitted with a door closer and a closing sequence controller.

In Rumia, we most commonly use them in multi-family buildings and commercial premises: stairwell entrances, doors to plant rooms, boiler rooms, machine rooms and garage compartments. As the town is situated 8.6 km from the coast, within the sea influence zone, we select paint finishes and fittings rated for C4 corrosion resistance in accordance with ISO 12944.

Free quote for fire doors in Rumia

We do not publish price lists or price ranges, as every order is assessed on a case-by-case basis. We prepare a quote for fire doors after measuring the opening in the building — only then do we know exactly what is actually included in the scope of work.

The scope of the valuation is primarily influenced by:

• opening dimensions and whether the door is single-leaf or double-leaf,
• fire resistance class — EI30 or EI60 — and the required smoke-tightness rating of Sa or S200,
• features: door closer, sequence controller, access control, glazing,
• colour and type of coating, also selected to suit the coastal conditions in Rumia,
• installation method — replacement within the existing door frame or full replacement with custom fitting,
• access and carrying conditions: floor level, lift, stairwell width, access for vehicles to the front of the building.

Book a free measurement — we’ll come round, assess the opening and draw up a detailed quote.

Replacement of fire doors in buildings in Ruma

Rumia is a mix of large-panel blocks, newer multi-family buildings and commercial premises along the main thoroughfares. In older stairwells, we often find unusual openings, which have frequently been widened or rebuilt during previous renovations — which is why we always take measurements on site, rather than relying on drawings.

The second factor is local: at 8.6 km from the sea, salt spray reaches the town carried by the wind from the bay. This is evident on the hinges, door closers and handles of the entrance doors to the stairwells, particularly in ventilated vestibules. That is why, in Rumia, we select fittings and coatings with a level of corrosion protection appropriate for category C4, and we pay particular attention to the threshold seal and the drainage of water from the flashings. The journey from our headquarters in Kochanów is around 23 km, so we carry out measurements and servicing without any delays.

What is the process for installing fire doors in Rumia?

The order is always the same, and we don’t take any shortcuts:

• Measurement — we arrive on site (approx. 23 km from Kochanów in the municipality of Luzino), measure the opening, check the condition of the reveals, the direction of opening, the installation route and the design requirements regarding the EI class and smoke-tightness.
• Order — once the quote has been accepted, we send the design to WIKĘD for production, specifying the colour, fittings and additional features.
• Installation — removal of old joinery, fitting and levelling of the door frame, fixing in accordance with the requirements of the FIREPROTECTOR ALU system, sealing, adjustment of the door leaf and door closer.
• Handover — we check that the windows close properly, that the seals fit snugly, and that the fittings are working correctly, and we tidy up the workstation. We hand over the product documentation.

We arrange installation dates in Rumia so as not to block the stairwell for longer than is necessary.

We also serve the surrounding area

As well as in Rumia, we install fire doors in neighbouring towns — Gdynia is about 4 km away, Reda 5 km, Dębogórze is also 5 km away, Kosakowo is 7 km away, and Gdynia Obłuże and Mosty are about 8 km away. In practice, this constitutes a single service area, so we can organise measurements in several buildings within this area in a single day.

The conditions there are similar: a coastal location, similar multi-family housing developments, and the same fire resistance requirements for stairwell enclosures and service rooms. If you manage a building in Rumia or the surrounding area and are planning to replace fire-rated joinery, book a free site survey — we’ll come along, inspect the openings and prepare a quote tailored to your specific property.